Roland MV-8800 Owner's Manual page 231

Achieving the ideal volume and loudness for an audio CD (Mastering)
5.
Press .
[REC ( )]
The EDIT MASTERING FILE NAME popup (Screen Guide; p. 3) will appear.
6.
Specify a filename.
A default filename is assigned automatically. You can change this if desired.
7.
Press [F5](OK).
The REC indicator (red) will blink, and the MV-8800 will be in mastering-standby.
●
If you press [EXIT] in step 9, the EDIT MIXDOWN FILE NAME popup window will close without entering standby
mode.
●
If you specified mixdown filename is onto a MIXDOWNTR folder that already contains setting, "That name
already exists. Overwrite?" message will appear.
If you press [F1](No), you can edit filename again. If you press [F5](Yes), the previous data will be overwritten.
8.
Press [PLAY ( )]
Mastering will begin you selected file in step 3. REC indicator (red) and PLAY indicator (green) will lit.
9.
To stop the mastering, press [STOP ( )].
Mastering will end, and the mastering file will be saved in the MASTERTR folder (REC and PLAY indicator will
be dark).
"Mastering finished. Go to CD Burning?" message will appear.
F-button
[F1](No)
[F5](Yes)
●
If playing reaches to the end of the selected file for mastering, mastering will stop automatically.
●
If a blank, writable CD-R/RW disc is not inserted in the drive when you press [F5](Yes) in step 9, a message of
"Insert a blank disc." will appear. Insert a blank CD-R/RW disc as described in "Inserting a disc" (p. 31).
Action
The message will close.
You will go to the CUE SHEET screen (Screen Guide; p. 206).
Select this if you want to immediately create an audio CD from the WAV file created by
mastering.
M-231
MV-8800 Owner's Manual
14