Loading the pre-installed patches
7.
Move CURSOR [
The ASSIGN TO PART / LIBRARY popup (Screen Guide; p. 224) will appear.
8.
Specify the parameters.
●
If you want to import into only one of these (part only or library only), turn the other setting Off.
• Part
If the To parameter is set to "Part," specifies the part in which the new patch will be loaded.
Range:
Off, 1–16
• Library
If the To parameter is set to "Library," specifies the library number in which the new patch will be loaded.
Range:
Off, 1–128
• F-buttons
F-button
[F3](With Delete)
[F5](Execute)
9.
Press [F5](Execute).
The patch will be imported into the specified part and library,
M-64
MV-8800 Owner's Manual
] [
] to the patch that you want to load and press [F5](Load).
Explanation
Deletes the samples used by the specified part or library patch (Delete Patch), and then load
the data
Loads the patch to the specified location.