Roland MV-8800 Owner's Manual page 66

Importing the WAV or AIFF files
• Truncate
Deletes the portions of the sample before the Start Point and after the End Point.
Range: Off, On
• Normalize
Raises the overall level of the sample without allowing the maximum level to be exceeded.
Range: Off, On
●
You can't use Undo function to bring back a truncated or normalized sample.
• Original Key
Specifies the basic pitch. When you play this key, the sample will sound at its original pitch (the pitch at which
it was sampled).
Range: 0 (C -)–60 (C 4)–127 (G 9)
• Loop
Specifies how [F4](Preview) will operate. You can also make setting of loop playback when you assign the
sample to pad as a Partial or an Audio Phrase.
Value
Off
On
• F-buttons
F-button
[F1](Retry)
[F2](Name)
[F3](Quick Assign)
[F4](Preview)
[F5](OK)
●
If you want to use the imported data as an audio phrase or patch, press [F3](Quick Assign) to get the Select
Quick Assign message (Screen Guide; p. 213).
You can use PREVIEW [FROM (
located) near the Start Point or End Point.
Preview
[TO ( )]
[FROM ( )]
7.
Press [F5](OK).
The RESULT popup will close. The imported data will be added to the list in the SAMPLE MANAGER screen.
Check the sample number that was assigned in step 5.
●
If you want to use the imported data as a patch or audio phrase, use the Quick Assign function in step 7. For
details, refer to "Playing the imported data immediately (Quick Assign)" (p. 75).
M-66
MV-8800 Owner's Manual
Explanation
The sample will audition once from the Start Point to the End Point.
The sample will repeatedly audition from the Start Point to the End Point.
Explanation
Discards the displayed sample will be discarded, and retries the sampling operation. The
IMPORT screen will appear.
Displays the EDIT NAME popup, where you can edit the sample name.
Displays the SELECT QUICK ASSIGN popup.
Auditions the currently-highlighted sample. To hear auditioning, hold down [F4](Preview).
The RESULT popup will close. The imported data will be added to the list in the SAMPLE
MANAGER screen (Screen Guide; p. 169).
)] and [TO (
Explanation
Playback sample from a point slightly earlier (Preview Length) than the current editing point.
Playback sample for a short time (Preview Length) from the current editing point.
)] to audition the region (the side at which the cursor is