Switching Images By Playing The Pads - Roland MV-8800 Owner's Manual

Importing images
4.
Press [F5](Pix Assign).
The PIX ASSIGN screen (Screen Guide; p. 186) will appear.
fig.pix-assign.eps
Assigns the image file selected by the cursor to the pad you specify.
F-button
[F1](Select Drive)
[F2](Clear)
[F3](Exchange)
[F4](Copy)
[F5](Assign)
5.
Select an image you want to import.
6.
Press [F5](Assign).
●
You can press [IMPORT] and import an image from the IMPORT screen. Use the cursor and [F3](Mark On/Off)
to select the image data you want to import, and press [F5](Import). The PIX QUICK ASSIGN popup will appear.
Use the Assign To field to specify the number of the pad to which you want to assign the image, and press
[F5](Execute). You can import up to sixteen files in a single operation.

Switching images by playing the pads

Here's how you can play the pads to switch the image that's being output from VGA OUT connector.
1.
Press [SYSTEM].
The SYSTEM MENU screen (Screen Guide; p. 172) will appear.
2.
With the cursor located in the lower row of icons, press [F4](Pix Jam). Alternatively, select
the PIX JAM icon and press [ENTER].
The PIX JAM screen (Screen Guide; p. 185) will appear.
3.
Strike a pad to which an image has been assigned.
The image assigned to the pad will be output from the VGA OUT connector.
M-286
MV-8800 Owner's Manual
Explanation
SELECT DRIVE popup will appear, where you can switch the current drive.
Clears the image that was assigned to the selected pad.
A message will ask "Assign Clear. Are you sure?" If you press [F5] (Yes), the assignment will
be cleared.
Exchanges the image assigned to the selected pad with an image assigned to a different pad.
When press [F3](Exchange), the PIX EXCHANGE popup will appear. Specify the number of the
pad whose image that you want to exchange, and press [F5](Execute).
Copies the selected pad's assigned image to a different pad.
Press [F4](Copy), PIX COPY popup will appear. Specify the copy-destination pad number, and
press [F5](Execute).
Assigns the image selected by the cursor to the pad you specify.