Saving A Patch To The Hard Disk - Roland MV-8800 Owner's Manual

Saving a patch to the hard disk

Here's how to save the current patch to disk. A patch saved in this way can be used by a different project. For
details, refer to "Loading a patch from the hard disk" (p. 100).
1.
Press [INSTRUMENTS].
The INSTRUMENTS screen (Screen Guide; p. 114) will appear.
2.
Use CURSOR [
The selected part number (the current part) is highlighted.
3.
Press [MENU].
The MENU popup will appear.
4.
Select "Save Patch" and press [F5](Select).
The SAVE PATCH popup (Screen Guide; p. 149) will appear.
5.
Specify the save destination (such as /USER) and press [F5](Save).
The EDIT FILE NAME popup (Screen Guide; p. 3) will appear.
6.
Specify the name of file you want to save.
The file name will be the name you assigned plus an extension of ".MV0".
7.
Press [F5](Execute).
The patch of the current part will be saved on the hard disk.
] [ ] to select the part that uses the patch you want to save.
Making a patch settings
MV-8800 Owner's Manual
5
M-99