Making instrument settings
1.
Press [INSTRUMENTS].
The INSTRUMENTS screen (Screen Guide; p. 114) will appear.
2.
Use CURSOR [
1
2
3.
Turn the VALUE dial or use [DEC] [INC] or the numeric keys to edit the value.
●
For details on the parameters, refer to "INSTRUMENTS screen" (Screen Guide; p. 114).
Mute Switch
1
Temporarily mutes (M) or un-mutes (Off) the playback of each part
2
2
Part Level
Adjusts the output volume of each part.
Part Pan
3
Sets the panning of each part. A setting of "L63" places the sound at far left, "0" at center, and "R63" at far right.
Part Delay/Chorus Send Level
4
Adjust the audio send level of the part to the delay/chorus effect.
5
Part Reverb Send Level
Adjusts the audio send level of the part to the reverb effect.
Part Output Assign
6
Adjusts the audio output destination of the part.
Voice Reserve
7
Specifies the number of voices that will be reserved for each part if you attempt to play more than 32 voices
of polyphony simultaneously.
●
You can't set the Voice Reserve parameter in a way that would cause the total for all parts to exceed 32.
M-90
MV-8800 Owner's Manual
] [
] [
] [
] to move the cursor to the parameter you want to adjust.
3
4
5
6
7