Modifying The Settings Of Each Part - Roland KR117/115 Owner's Manual

fig.d-16tr.eps_50
Icon
Touch to select the part to be recorded, or the
<1>–<16> part whose settings are to be changed. The
button for the selected part changes color.
This Part to be played back
This part is selected
(Movement)
The Part not to be played back (Muted Part)
Parts that do not have performance data
recorded to them.
Solo Only the selected Part is played back.
This allows you to prevent the sound for the
Mute
selected part from playing.
The performance data for the selected part is
Clear
deleted.
This displays the Part Settings screen, in which
Part you can make detailed settings for each part.
For details refer to p. 137.
The Tone Set screen appears. For details refer
Tone Set
to p. 138.

■ Modifying the Settings of Each Part

You can change the Tones and volume, as well as mute the
playback, for each individual part in songs recorded with the
16-track Sequencer and the internal songs.
→ Because commercially available Roland SMF music files are
also made up of 16 Parts, you can change the settings for the
individual Parts and play them back in the same way.
First, select the song for which the settings are to be made
(p. 75).
1.
Display the 16-track Sequencer screen (p. 136).
2.
Touch the screen to choose the Part for which you want
to make settings.
Change the settings for the selected Part.
Explanation
Chapter 8 Creating and Editing Songs
Display
Solo Only the selected Part is played back.
Toggles playback of the selected Part to on
Mute
or off.
The performance data for the selected part is
Clear
deleted.
* When you touch <Clear>, a message asking you to confirm the
deletion appears. To erase the recorded sound, touch <OK>. If
you don't want to erase the recorded sound, touch <Cancel>.
Once a performance has been erased, it can't be restored.
* You cannot touch <Clear> during playback of the song.
3.
Touch <Part> to make more detailed settings for the
selected part.
A screen like the one shown below appears.
fig.d-16trpart.eps_50
You can change the Tone for the selected Part by
pressing a Tone button while this screen is displayed.
When selecting Part 10 or 11, you can touch <Drum Set>
to select the drum set or effect sound.
The Part name and tone name are displayed at the top of
the screen.
4.
Touch for the corresponding item to change
the setting.
You can adjust the values by touching the desired
parameter and turning the dial or by touching and
dragging the slider.
Display
Volume Changes the volume level.
Changes the amount of reverb effect
Reverb
applied to the sound.
Chorus Changes the amount of chorus applied.
Shifts the direction from which the sound is
heard between left and right.
Panpot
Touch
or touch
Function
Explanation
to shift the sound to the right,
to shift it to the left.
137