Adjusting The Tone Of An Instruments Or Audio Track - Roland MV-8800 Owner's Manual

Adjusting the tone of an instruments or audio track

Each part of instruments and the mixer section of each audio track has a 3-band EQ (equalizer).
You can use the equalizer to adjust the tone.
1.
Press [MIXER].
The MIXER screen will appear.
2.
Press the function buttons to switch the mixer you want to adjust tones by equalizer.
F-button
[F1](Audio Track)
[F2](Part 1–8)
[F3](Part 9–16)
●
The mixer screen accessed by pressing [F4](AUX/Phrs/In) does not have an equalizer function.
3.
Press [F4](➔EQ)
The screen will show the EQ screen for the mixer you select in step 2.
Mixer selected
Audio Track
Part 1–8
Part 9–16
4.
Use CURSOR [
you want to adjust.
5.
Use the VALUE dial or [INC] [DEC] to adjust.
The value of the selected parameter will change.
●
Pressing [F5](➔EQ) will display the EQ screen, and pressing [F5](➔Level/Pan) will display the MIXER screen.
The [F5](➔EQ) and [F5](➔Level/Pan) functions will alternate each time you press the button.
●
While the EQ screen is displayed, repeatedly pressing [MIXER] will cycle through the screens in the following
order:
MIXER (AUDIO TRACK) ➔ MIXER (INSTRUMENTS PART 1–8) ➔ MIXER (INSTRUMENTS PART 9–16)
➔ MIXER (AUDIO TRACK)
●
For details on the equalizer parameters, refer to each MIXER EQ screen.
M-208
MV-8800 Owner's Manual
Screen displays
MIXER (AUDIO TRACK) screen (Screen Guide; p. 235)
MIXER (INSTRUMENT PART 1–8) screen (Screen Guide; p. 236)
MIXER (INSTRUMENT PART 9–16) screen (Screen Guide; p. 236)
Screen displayed
MIXER (AUDIO TRACK EQ) screen (Screen Guide; p. 238)
MIXER(INSTRUMENTS PART 1-8 EQ) screen (Screen Guide; p. 239)
MIXER(INSTRUMENTS PART 9-16 EQ) screen (Screen Guide; p. 239)
] [ ] [ ] [ ] to move the cursor to the equalizer parameter on which