Saving A Current Effect Setting To The Hard Disk - Roland MV-8800 Owner's Manual

Saving a current effect setting to the hard disk

Here's how to save the current effect setting file to disk. An effect setting file saved in this way can be used by
a different project.
1.
Press [EFFECTS].
The EFFECTS screen (Screen Guide; p. 229) will appear.
2.
Use CURSOR [ ] [
3.
Press [F5](Edit).
The EFFECTS EDIT screen (Screen Guide; p. 231) will appear.
4.
Press [MENU].
The MENU popup will appear.
5.
Depending on the current effect, select "Save MFX," "Save Dly/Cho," or "Save Reverb";
then press [F5](Select).
The screen that appears will depend on the current effect.
Current effects
MFX
Dly/Cho
Reverb
6.
Specify the save destination (such as /USER) and press [F5] (Save).
The EDIT NAME popup (Screen Guide; p. 3) will appear.
7.
Specify the name of file you want to save.
The file name will be the name you assigned plus an extension.
Current effects
MFX
Dly/Cho
Reverb
8.
Press [F5](Execute).
The settings file of the currently selected effect will be saved on the hard disk.
] to select the effects that use the setting you want to save.
Screens displays
SAVE MFX popup (Screen Guide; p. 233)
SAVE DELAY/CHORUS popup (Screen Guide; p. 233)
SAVE REVERB popup (Screen Guide; p. 233)
Extension
.MVF
.MVC
.MVR
M-213
MV-8800 Owner's Manual
12