Automating Mute Operations For Each Track; Recording Mute Operations - Roland MV-8800 Owner's Manual

Automating mute operations for each track

Mute settings for each track can be recorded on the Mute Control Track and played-back.

Recording mute operations

1.
Hold down [SHIFT], and press [PAD BANKS].
The TRACK MUTE screen (Screen Guide; p. 75) will appear.
2.
Move the current time to the location at which you want to start recording mute operations.
3.
Press [REC ( )].
The REC indicator will blink, and the RECORDING PARAMETER (MUTE CONTROL) popup (Screen Guide;
p. 21) will appear. Make recording settings as necessary.
• Count In
Specifies how recording will begin.
Value Explanation
Off Recording will begin the moment you press [PLAY (
1 Meas When you press [PLAY (
record-start location, and recording will begin at the record-start location.
2 Meas When you press [PLAY (
record-start location, and recording will begin at the record-start location.
Wait Note Recording will begin the moment you press [PLAY (
• Auto Punch
Recording will begin (punch-in) and end (punch-out) automatically at the time locations you specify
beforehand.
Parameter Value
In 0001-01-000 – 9999-**-***
Out 0001-01-000 – 9999-**-***
• Metronome Mode
Specifies when the metronome signal will be output.
Value Explanation
Off The metronome will not sound.
Rec Only The metronome will sound only during recording.
Play&Rec The metronome will sound during playback and recording.
Always The metronome will always sound.
• Input Quantize
You can record into the sequencer while applying quantization.
Value: Off, (60),
)], a count-in will sound from one measure earlier than the
)], a count-in will sound from two measures earlier than the
(80), (120), (160), (240),
)].
)].
(320), (480)
M-221
MV-8800 Owner's Manual
13