Table of Contents
Advertisement
Naming a pad bank
1.
Press [PAD BANKS].
The PAD BANKS indicator (red) will light, and the PAD BANKS popup (Screen Guide; p. 5) will appear.
2.
Press [F1](Name).
The EDIT PAD BANK NAME (Screen Guide; p. 3) will appear. Input the desired bank name.
3.
When you've finished entering the name, press [F5](OK).
Fixed Velocity function
Here's how you can disable the velocity sensitivity of the pads.
1.
Press [FIXED VELOCITY].
The indicator will light orange, and the FIXED VELOCITY function will be turned on. In this state, the pads will
produce a fixed velocity (initial value = 127) regardless of how strongly you strike them.
You can set the velocity value as desired. Refer to "Fixed Velocity Level" (p. 174).
●
To turn off the FIXED VELOCITY function, press [FIXED VELOCITY] once again to make the indicator go dark.
Multilevel function
Here's how you can use the sixteen velocity pads to play a single partial over sixteen different velocity levels.
1.
Strike the VELOCITY PADS whose sound you want to play over sixteen pre-determined
velocity levels.
The sound you play will be selected.
2.
Press [MULTILEVEL].
The indicator will light orange, and the MULTILEVEL function will be turned on. In this state, pad 1 plays a low
velocity and pad 16 plays the maximum velocity.
●
Your actual playing strength is ignored while MULTILEVEL is on.
●
To turn off the MULTILEVEL function, press [MULTILEVEL] once again to make the indicator go dark.
●
The pad you strike determines which of the sixteen velocity levels are produced.
Pad
1
2
3
4
Velocity
Pad
Velocity
7
5
39
15
6
47
23
7
55
31
8
63
Pad
Velocity
Pad
Velocity
9
71
13
103
10
79
14
111
11
87
15
119
12
95
16
127
Velocity pad operations
MV-8800 Owner's Manual
M-37
Advertisement
Table of Contents
