Roland MV-8800 Owner's Manual page 281

● Step recording an Audio track
Step Time
Dot button
Step Time button
Duration
Velocity
●
If the Step Time parameter is set to Phrase or Meas, the dotted note setting is ignored.
● Step recording a Pattern track
Step Time
Dot button
Step Time button
●
If the Step Time parameter is set to Pattern, the dotted note setting is ignored, and [Tie] and [Rest] will also be
unavailable.
Explanation
Specifies the length of the audio events you will input.
Adds a dot to the specified note value.
Click this button you specify the length of the audio events you will input.
Specifies the actual length of the audio event, as a percentage of the length you specified
for Step Time.
Specifies the strength of the audio event. Choose "Real" if you want the velocity of the note
to correspond to the strength with which you strike the velocity pad.
Explanation
Reverts the preceding input.
Connects (extends) the event at the current time to the next step.
Inputs a rest (silence).
Explanation
Specifies the length of the pattern events you will input.
If you want to input the entire length of the pattern, set this to Pattern.
Adds a dot to the specified note value.
Click this button you specify the length of the audio events you will input.
Explanation
Reverts the preceding input.
Connects (extends) the event at the current time to the next step.This button is unavailable
if Step Time is set to Pattern.
The PUT PATTERN popup will appear.
Select the pattern that you want to input.
Inputs a rest (silence). This button is unavailable if Step Time is set to Pattern.
Operations using the external display
MV-8800 Owner's Manual
16
M-281