Menu Bar - Roland MV-8800 Owner's Manual

Explanation of screens shown in the external display
● Function button Block
Function buttons
Wave Memory
meter
Sequence Memory
meter
● Menu Bar
❍ PROJECT
Manage the project and make project setting.
1 Rename Project...
The EDIT PROJECT NAME popup will appear. Assign a name to the project.
2 Set Project Protection...
The SET PROJECT PROTECTION popup will appear. Protect a project saved on disk from being overwritten
or deleted.
3 Load Project...
The LOAD PROJECT popup will appear. Load a project, making it the current project.
4 Save Project
"Save Current Project?" message will appear. Save the current project.
5 Save As New Project...
The SAVE AS NEW PROJECT popup will appear. Here you can save the current project under a different
name, and then make it the current project.
6 Create New Project...
The CREATE NEW PROJECT popup will appear. Create a new project.
7 Delete Project...
The DELETE PROJECT popup will appear. Delete an unwanted project.
8 Sample Manager
The SAMPLE MANAGER popup will appear. Here you can manage the samples in the current project.
9 Backup To CD...
The BACKUP PROJECT TO CD popup will appear. Backup the current project to a CD-R/RW disc.
10 Recover From CD...
The RECOVER PROJECT FROM CD popup will appear. Recover (restore) a backed-up project from CD into
the MV-8800 with the name you specify.
11 Shutdown
"SHUTDOWN Are you sure?" message will appear. You must execute this operation before powering-off the
MV-8800.
M-264
MV-8800 Owner's Manual
Explanation
The [F1]–[F5] buttons correspond to functions displayed at the bottom of the LCD.
If it is in the state which can do the direct recording, the remaining recordable time and the
remaining amount of memory are displayed.
In the state which can do the sequence recording, green meter is displayed. This indicates
the amount of sequence data that has been recorded. The numerical value shows the
proportion of free area available for recording events into the sequencer.