Copying Performance Data - Roland MV-8800 Owner's Manual

Here's how you can copy the specified region of performance data. This is a convenient way to repeat a phrase
several times. You can choose from two copy methods; Copy & Paste or Copy & Insert.
● Copying data and pasting it at another location (Copy & Paste).
The Copy & Paste command pastes the copied performance data into another track or note number. Data
already existing at the paste location will be overwritten.
●
For details on all of the parameters and settings for Copy & Paste, refer to "COPY&PASTE popup" (Screen
Guide; p. 35).
❍ Parameters to specify
• To
Specify the new time to which the data will be pasted.
• Transpose
Move the pitch of the note messages upward or downward.
●
The Transpose parameter is available if you accessed the COPY & PASTE popup from the PIANO ROLL EDIT
screen.
• To Track
Specify the track to which the data will be copied. If you're copying more than one track, this parameter is
invalid.
●
The To Track parameter is available if you accessed the COPY & PASTE popup from the SEQUENCE EDIT
screen.
• Mode
Specify what will happen if performance data exists at the copy-destination.
Setting Explanation
Mix The data will be merged (combined) with the data existing at the paste destination.
Replace The data will replace (overwrite) the data existing at the paste destination.
●
If the track(s) being copied include audio tracks or pattern tracks, the Mode parameter is fixed at Replace.
• Times
Specify the number of times that the data will be pasted.

Copying performance data

List of available editing commands
MV-8800 Owner's Manual
10
M-189