D-Link xStack DGS-3426 Cli Manual page 80

DGS-3400:4#show stp
Command: show stp
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
Loopback Detection
LBD Recover Time
DGS-3400:4#
Status 3 : STP enabled for MSTP
DGS-3400:4#show stp
Command: show stp
LBD Recover Time
DGS-3400:4#
show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show STP ports:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
LoopBack Detection
Used to display the Switch's current instance_id configuration.
show stp ports <portlist>
This command displays the STP Instance Settings and STP Instance
Operational Status currently implemented on the Switch.
<portlist> − Specifies a range of ports to be configured. The beginning
and end of the port list range are separated by a dash. For example, 1-4
specifies all of the ports between port 1 and port 4.
None
: Enabled
: RSTP
: 20
: 2
: 15
: 20
: 3
: Enabled
: Enabled
: 60
: Enabled
: MSTP
: 20
: 2
: 15
: 20
: 3
: Enabled
: Enabled
: 60
77