D-Link xStack DGS-3426 Cli Manual page 234

To show other groups information in summary, if group is specified:
DGS-3400:4#show sim group
Command: show sim group
SIM Group Name : default
ID MAC Address
--- -----------------
*1 00-01-02-03-04-00
2 00-55-55-00-55-00
SIM Group Name : SIM2
ID MAC Address
--- -----------------
*1 00-01-02-03-04-00
2 00-55-55-00-55-00
'*' means commander switch.
DGS-3400:4#
Example usage:
To view SIM neighbors:
DGS-3400:4#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port
------
23
23
24
Total Entries: 3
DGS-3400:4#
reconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Platform /
Capability
------------------------
DGS-3400 L2 Switch
DGS-3400 L2 Switch
Platform /
Capability
-----------------------
DGS-3400 L2 Switch
DGS-3400 L2 Switch
MAC Address Role
------------------ ---------
00-35-26-00-11-99 Commander
00-35-26-00-11-91 Member
00-35-26-00-11-90 Candidate
Used to connect to a member switch, through the commander
switch, using telnet.
reconfig {member_id <value 1-32 | exit}
This command is used to reconnect to a member switch using telnet.
member_id <value 1-32> - Select the ID number of the member
switch the user desires to configure.
exit – This command is used to exit from managing the member
switch and will return to managing the commander switch.
Only administrator-level users can issue this command.
Hold Firmware
Time Version
----- ---------
40 1.20-B15
140 1.20-B15
Hold Firmware
Time Version
------ ---------
40 1.20-B15
140 1.20-B15
231
Device Name
----------------
Trinity
default master
Device Name
----------------
Neo
default master