D-Link xStack DGS-3426 Cli Manual page 39

delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
DGS-3400:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS-3400:4#
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
DGS-3400:4#show snmp groups
Command: show snmp groups
Vacm Access
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Only administrator-level users can issue this command.
Used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also
displayed.
show snmp groups
The show snmp groups command displays the group-names of SNMP
groups currently configured on the Switch. The security model, level, and
status of each group are also displayed.
None.
Only administrator-level users can issue this command.
Table Settings
: initial
: restricted
:
: restricted
: SNMPv3
: NoAuthNoPriv
: public
: CommunityView
:
: CommunityView
: SNMPv1
: NoAuthNoPriv
: public
36