D-Link xStack DGS-3426 Cli Manual page 22

reset
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
login
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To initiate the login procedure:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to reset the Switch to the factory default settings.
reset {[config | system]}
This command is used to restore the Switch's configuration to the
default settings assigned from the factory.
config − If the keyword 'config' is specified, all of the factory default
settings are restored on the Switch including the IP address, user
accounts, the switch history log and banner. The Switch will not save
or reboot.
system − If the keyword 'system' is specified all of the factory default
settings are restored on the Switch. The Switch will save and reboot
after the settings are changed to default. Rebooting will clear all
entries in the Forwarding Data Base.
If no parameter is specified, the Switch's current IP address, user
accounts, the switch history log and banner are not changed. All
other parameters are restored to the factory default settings. The
Switch will not save or reboot.
Only administrator-level users can issue this command.
DGS-3400:4#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
DGS-3400:4#
Used to log in a user to the Switch's console.
login
This command is used to initiate the login procedure. The user will be
prompted for a Username and Password.
None.
None.
DGS-3400:4#login
Command: login
UserName:
19