D-Link xStack DGS-3426 Cli Manual page 21

save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
DGS-3400:4#save
Command: save
Saving all configurations to NV-RAM... Done.
DGS-3400:4#
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to save changes in the Switch's configuration to non-volatile
RAM.
save {[config <config_id 1-2> | log | all]}
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
config <config_id 1-2> - Specifiy to save current settings to
configuration file 1 or 2.
log - Specifiy to save current Switch log to NV-RAM.
all – Specifiy to save all configuration settings. If nothing is specified
after "save", the Switch will save all.
Only administrator-level users can issue this command.
Used to restart the Switch.
reboot
This command is used to restart the Switch.
None.
Only Administrator-level users can issue this command.
DGS-3400:4#reboot
Command: reboot
Are you sure want to proceed with the system reboot? (y|n)
Please wait, the switch is rebooting...
18