D-Link xStack DGS-3426 Cli Manual page 233

show sim
Restrictions
Example usage:
To show the SIM information in detail:
DGS-3400:4#show sim
Command: show sim
SIM Version
Firmware Version
Device Name
MAC Address
Capabilities
Platform
SIM State
Role State
Discovery Interval : 30 sec
Holdtime
DGS-3400:4#
To show the candidate information in summary, if the candidate ID is specified:
DGS-3400:4#show sim candidates 1-2
Command: show sim candidates 1-2
ID MAC Address
--- -----------------
1 00-01-02-03-04-00
2 00-55-55-00-55-00
Total Entries: 2
DGS-3400:4#
To show the member information in summary, if the member ID is specified:
DGS-3400:4#show sim member 1-2
Command: show sim member 1-2
ID MAC Address
--- -----------------
1 00-01-02-03-04-00
2 00-55-55-00-55-00
Total Entries: 2
DGS-3400:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
information concerning the SIM group. To view a specific group, include the
commander's MAC address of the group.
neighbor – Entering this parameter will display neighboring devices of the Switch. A
SIM neighbor is defined as a switch that is physically connected to the Switch but is
not part of the SIM group. This screen will produce the following results:
Port – Displays the physical port number of the commander switch where
the uplink to the neighbor switch is located.
MAC Address – Displays the MAC Address of the neighbor switch.
Role – Displays the role(CS, CaS, MS) of the neighbor switch.
Only administrator-level users can issue this command.
: VER-1.61
: 1.20.B15
:
: 00-10-20-33-45-00
: L2
: DGS-3400 L2 Switch
: Disabled
: Candidate
: 100 sec
Platform /
Capability
------------------------
DGS-3400 L2 Switch
DGS-3400 L2 Switch
Platform /
Capability
------------------------
DGS-3400 L2 Switch
DGS-3400 L2 Switch
Hold Firmware
Time Version
----- ---------
40 1.20-B15
140 1.20-B15
Hold Firmware
Time Version
---- ---------
40 1.20-B15
140 1.20-B15
230
Device Name
----------------
The Man
default master
Device Name
----------------
The Man
default master