D-Link xStack DGS-3426 Cli Manual page 137

DGS-3400:4#show mld_snooping group
Command : show mld_snooping group
VLAN Name
Multicast Group
MAC Address
Reports
Listening Port
VLAN Name
Multicast Group
MAC Address
Reports
Listening Port
VLAN Name
Multicast Group
MAC Address
Reports
Listening Port
VLAN Name
Multicast Group
MAC Address
Reports
Listening Port
VLAN Name
Multicast Group
MAC Address
Reports
Listening Port
Total Entries :5
DGS-3400:4#
show mld_snooping mrouter_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the MLD snooping multicast router port settings:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
: default
: FF02 ::13
: 33-33-00-00-00-13
: 1
: 1,7
: default
: FF02 ::14
: 33-33-00-00-00-14
: 1
: 2,7
: default
: FF02 ::15
: 33-33-00-00-00-15
: 1
: 2,9
: default
: FF02 ::16
: 33-33-00-00-00-16
: 1
: 2,7
: default
: FF02 ::17
: 33-33-00-00-00-17
: 1
: 2,7
Used to display the current router ports set on the Switch.
show mld_snooping group {vlan<vlan_name 32} {[static | dynamic |
forbidden]}
This command display the current router ports set on the Switch.
vlan <vlan_name 32> − The name of the VLAN on which the router port
resides.
static – Displays router ports that have been statically configured.
dynamic – Displays router ports that have been dynamically configured.
forbidden – Displays router ports that have been configured as forbidden.
If no parameter is specified, the Switch will display all currently configured
router ports on the Switch.
Only administrator-level users can issue this command.
134