D-Link xStack DGS-3426 Cli Manual page 37

config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666":
DGS-3400:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DGS-3400:4#
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
DGS-3400:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DGS-3400:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------- -------------------------------
dlink
private
public
Total Entries: 3
DGS-3400:4#
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID 10-64>
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
<snmp_engineID 10-64> − An alphanumeric string that will be used
to identify the SNMP engine on the Switch.
Only administrator-level users can issue this command.
Used to display the identification of the SNMP engine on the Switch.
show snmp engineID
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.
None.
Only administrator-level users can issue this command.
View Name
ReadView
CommunityView
CommunityView
34
Access Right
------------
read_write
read_write
read_only