D-Link xStack DGS-3426 Cli Manual page 179

config dst
Parameters
Restrictions
Example usage:
To configure daylight savings time on the Switch:
DGS-3400:4#config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e_day
wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e_day
wed e_mth 10 e_time 15:30 offset 30
Success.
DGS-3400:4#
show time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the time cuurently set on the Switch's System clock:
DGS-3400:4#show time
Command: show time
Current Time Source : System Clock
Boot Time
Current Time
Time Zone
Daylight Saving Time : Repeating
Offset in Minutes
Repeating From
Annual
DGS-3400:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
e_date - Configure the specific date (day of the month) to begin DST.
•
<end_date 1-31> - The end date is expressed numerically.
offset [30 | 60 | 90 | 120] - Indicates number of minutes to add or to subtract during the
summertime. The possible offset times are 30,60,90,120. The default value is 60.
Only administrator-level users can issue this command.
Used to display the current time settings and status.
show time
This will display system time and date configuration as well as
display current system time.
None.
None.
: 4 May 2006 10:21:22
: 4 May 2006 15:01:32
: GMT +02:30
: 30
: Apr 2nd Tue 15:00
To : Oct 2nd Wed 15:30
From : 29 Apr 00:00
To : 12 Oct 00:00
176