D-Link xStack DGS-3426 Cli Manual page 244

DGS-3400:4# config greeting_message
Command: config greeting_message
Greeting Messages Editor
================================================================================
Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.
================================================================================
<Function Key>
Ctrl+C Quit without save
Ctrl+W Save and quit
--------------------------------------------------------------------------------
show greeting_message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the currently configured greeting message:
DES-3400:4#show greeting_message
Command: show greeting_message
=========================================================================
=========================================================================
DES-3400:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.20-B15
<Control Key>
left/right/
up/down
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
Used to view the currently configured greeting message
configured on the Switch.
show greeting_message
This command is used to view the currently configured greeting
message on the Switch.
None.
None.
DES-3400 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.00.B30
Copyright(C) 2004-2005 D-Link Corporation. All rights reserved.
Move cursor
241