D-Link xStack DGS-3426 Cli Manual page 45

DGS-3400:4#enable snmp authenticate traps
Command: enable snmp authenticate traps
Success.
DGS-3400:4#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
DGS-3400:4#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Traps : Enabled
DGS-3400:4#
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To prevent SNMP traps from being sent from the Switch:
DGS-3400:4#disable snmp traps
Command: disable snmp traps
Success.
DGS-3400:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to show SNMP trap support on the Switch .
show snmp traps
This command is used to view the SNMP trap support status
currently configured on the Switch.
None.
Only administrator-level users can issue this command.
: Enabled
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the Switch.
None.
Only administrator-level users can issue this command.
42