D-Link xStack DGS-3426 Cli Manual page 148

Example usage:
To configure the RADIUS settings:
show radius
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display RADIUS settings on the Switch:
DGS-3400:4#show radius
Command: show radius
Index IP Address
-----
1
2
3
Total Entries : 3
DGS-3400:4#
create 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an 802.1x user:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#config radius 1 10.48.74.121 key dlink default
Command: config radius 1 10.48.74.121 key dlink default
Success.
DGS-3400:4#
Used to display the current RADIUS configurations on the Switch.
show radius
The show radius command is used to display the current RADIUS
configurations on the Switch.
None.
None.
Auth-Port
Number
------------------ ---------
10.1.1.1 1812
20.1.1.1 1800
30.1.1.1 1812
Used to create a new 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command is used to create new 802.1x users.
<username 15> − A username of up to 15 alphanumeric characters in
length.
Only administrator-level users can issue this command.
Acct-Port Status
Number
--------- -----------
1813 Active
1813 Active
1813 Active
145
Key
------------
switch
des3226
dlink