D-Link xStack DGS-3426 Cli Manual page 17

To display the Switch's information:
show serial_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the serial port setting:
DGS-3427:4#show serial_port
Command: show serial_port
Baud Rate
Data Bits
Parity Bits : None
Stop Bits
Auto-Logout : 10 mins
DGS-3427:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show switch
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version
Firmware Version
Hardware Version
System Name
System Location
System Contact
Spanning Tree
GVRP
IGMP Snooping
MLD Snooping
TELNET
WEB
RMON
SSL status
SSH status
802.1x
Jumbo Frame
Clipaging
MAC Notification
Port Mirror
SNTP
HOL Prevention State : Enabled
Syslog Global State
Single IP Management : Disabled
Dual Image
DGS-3400:4#
Used to display the current serial port settings.
show serial_port
This command displays the current serial port settings.
None.
None
: 115200
: 8
: 1
: DGS-3427 Gigabit Ethernet Switch
: 00-80-C8-34-27-00
: 10.34.27.100 (Manual)
: default
: 255.0.0.0
: 0.0.0.0
: Build 1.20-B13
: Build 1.00-B14
: 0A1
: DGS-3427
: BR5-49
: Junior Sample
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled (TCP 23)
: Enabled (TCP 80)
: Disabled
: Disabled
: Disabled
: Disabled
: Off
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Supported
14