D-Link xStack DGS-3426 Cli Manual page 177

To disable SNTP support:
DGS-3400:4#disable sntp
Command: disable sntp
Success.
DGS-3400:4#
config time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To manually set system time and date settings:
config time_zone
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure time zone settings:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to manually configure system time and date settings.
config time <date ddmthyyyy> <time hh:mm:ss>
This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
date – Express the date using two numerical characters for the day of the
month, three alphabetical characters for the name of the month, and four
numerical characters for the year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two
numerical characters each for the hour using a 24-hour clock, the minute
and second. For example: 19:42:30.
Only administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP support is
enabled.
DGS-3400:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3400:4#
Used to determine the time zone used in order to adjust the system clock.
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min
<minute 0-59>}
This will adjust system clock settings according to the time zone. Time
zone settings will adjust SNTP information accordingly.
operator – Choose to add (+) or subtract (-) time to adjust for time zone
relative to GMT.
hour – Select the number of hours different from GMT.
min – Select the number of minutes difference added or subtracted to
adjust the time zone.
Only administrator-level users can issue this command.
174