D-Link xStack DGS-3426 Cli Manual page 176

show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DGS-3400:4#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DGS-3400:4#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DGS-3400:4#enable sntp
Command: enable sntp
Success.
DGS-3400:4#
disable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the source IP
address, time and poll interval.
None.
None.
: System Clock
: Disabled
: 10.1.1.1
: 30 sec
To enable SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately
configured (see config sntp). Enabling and configuring SNTP
support will override any manually configured system time settings.
None.
Only administrator-level users can issue this command. SNTP
settings must be configured for SNTP to function (config sntp).
To disable SNTP server support.
disable sntp
This will disable SNTP support. SNTP service must be separately
configured (see config sntp).
None.
Only administrator-level users can issue this command.
173