config command prompt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To modify the command prompt to "AtYourService":
DGS-3400:4#config command_prompt AtYourService
Command: config command_prompt AtYourService
Success.
AtYourService:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to Configure the command prompt.
config command_prompt [<string 16> | username | default]
Administrator level users can use this command to change the
command prompt.
string 16 - The command prompt can be changed by entering a
new name of no more that 16 characters.
username - The command prompt will be changed to the login
username.
default – The command prompt will reset to factory default
command prompt.
Only administrator-level users can issue this command. Other
restrictions include:
•
If the "reset/reset config" command is executed, the
modified command prompt will remain modified. However,
the "reset system" command will reset the command
prompt to the original factory banner.
242