D-Link xStack DGS-3426 Cli Manual page 151

show auth_client
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current RADIUS authentication client:
show auth_diagnostics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication diagnostics for port 16:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to display the current RADIUS authentication client.
show auth_client
The show auth_client command is used to display the current
RADIUS authentication client currently configured on the Switch.
None.
None.
DGS-3400:4#show auth_client
Command: show auth_client
radiusAuthClient
----------------------------------------------------------------------------------------
radiusAuthClientInvalidServerAddresses
radiusAuthClientIdentifier
radiusAuthServerEntry
----------------------------------------------------------------------------------------
radiusAuthServerIndex
radiusAuthServerAddress
radiusAuthClientServerPortNumber
radiusAuthClientRoundTripTime
radiusAuthClientAccessRequests
radiusAuthClientAccessRetransmissions
radiusAuthClientAccessAccepts
radiusAuthClientAccessRejects
radiusAuthClientAccessChallenges
radiusAuthClientMalformedAccessResponses 0
radiusAuthClientBadAuthenticators
radiusAuthClientPendingRequests
radiusAuthClientTimeouts
radiusAuthClientUnknownTypes
radiusAuthClientPacketsDropped
CTRL+C ESC q Quit
Used to display the current authentication diagnostics.
show auth_diagnostics {ports [<portlist> | all]}
The show auth_diagnostics command is used to display the
current authentication diagnostics of the Switch on a per port basis.
ports <portlist> − Specifies a range of ports.
all – Specifies that all ports will be viewed.
None.
SPACE n Next Page Enter
148
0
D-Link
0
: 1
: 0.0.0.0
0
0
0
0
0
0
0
0
0
0
0
0
Next Entry a All