D-Link xStack DGS-3426 Cli Manual page 61

DGS-3400:4#show log
Command: show log
Index Date
----- ----------------
5 2006-04-26
4 2006-04-26
3 2006-04-25
2 2006-04-25
1 2006-04-25
DGS-3400:4#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DGS-3400:4#enable syslog
Command: enable syslog
Success.
DGS-3400:4#
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Time Log Text
----------- ----------------------------------------------------
09:38:18 Successful login through Console (Username: Anonymous)
09:36:20 System started up
12:38:18 Port 1 link up, 100Mbps FULL duplex
12:38:00 Spanning Tree Protocol is disabled
12:37:42 Configuration saved to flash (Username: Anonymous)
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to
a remote host.
None.
Only administrator-level users can issue this command.
Used to enable the system log to be sent to a remote host.
disable syslog
The disable syslog command enables the system log to be sent to a
remote host.
None.
Only administrator-level users can issue this command.
DGS-3400:4#disable syslog
Command: disable syslog
Success.
DGS-3400:4#
58