D-Link xStack DGS-3426 Cli Manual page 36

DGS-3400:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DGS-3400:4#
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink:"
DGS-3400:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-3400:4#
show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command is used to remove a previously defined
SNMP community string from the Switch.
<community_string 32> − An alphanumeric string of up to 32 characters that is
used to identify members of an SNMP community. This string is used like a
password to give remote SNMP managers access to MIB objects in the Switch's
SNMP agent.
Only administrator-level users can issue this command.
Used to display SNMP community strings configured on the Switch.
show snmp community <community_string 32>
The show snmp community command is used to display SNMP community
strings that are configured on the Switch.
<community_string 32> − An alphanumeric string of up to 32 characters that is
used to identify members of an SNMP community. This string is used like a
password to give remote SNMP managers access to MIB objects in the Switch's
SNMP agent.
None.
33