D-Link xStack DGS-3426 Cli Manual page 238

DGS-3400:4# download sim_ms firmware_from_tftp 10.53.13.94 c:/des3828.had all
Command: download sim_ms firmware_from_tftp 10.53.13.94 c:/des3828.had all
This device is updating firmware. Please wait...
Download Status :
ID MAC Address
--- -----------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Success
3 00-07-06-05-04-03 Success
DGS-3400:4#
To download configuration files:
DGS-3400:4# download sim configuration_from_tftp 10.53.13.94 c:/des3828.txt all
Command: download sim configuration_from_tftp 10.53.13.94 c:/des3828.txt all
This device is updating configuation. Please wait...
Download Status :
ID MAC Address
--- -----------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Success
3 00-07-06-05-04-03 Success
DGS-3400:4#
upload sim_ms
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Result
-------------
Result
----------------
User to upload a configuration file to a TFTP server froma specified
member of a SIM group.
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr>
<path_filename> { [members <mslist> | all]}
This command will upload a configuration file to a TFTP server from a
specified member of a SIM group.
configuration_to_tftp - Specify this parameter if the user wishes to
upload a switch configuration to members of a SIM group.
log_to_tftp - Specify this parameter if the user wishes to upload a
switch log to members of a SIM group.
<ipaddr> - Enter the IP address of the TFTP server the user wishes to
upload a configuration file to.
<path_filename> – Enter a user-defined path and file name on the
TFTP server the user wishes to upload configuration files to.
members – Enter this parameter to specify the members the user
prefers to upload switch configuation or log files to. The user may
specify a member or members by adding one of the following:
<mslist> - Enter a value, or values to specify which members
of the SIM group will upload the switch configuration or log
files.
all – Add this parameter to specify all members of the SIM
group will upload the switch configuration or log files.
Only administrator-level users can issue this command.
235