D-Link xStack DGS-3426 Cli Manual page 226

show ssl certificate
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view certificate file information on the Switch:
DGS-3400:4# show ssl certificate
Command: show ssl certificate
Loaded with RSA Certificate!
DGS-3400:4#
download SSL certificate
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To download a certificate file and key file to the Switch:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show ssl
Command: show ssl
SSL status
RSA_WITH_RC4_128_MD5
RSA_WITH_3DES_EDE_CBC_SHA
DHE_DSS_WITH_3DES_EDE_CBC_SHA
RSA_EXPORT_WITH_RC4_40_MD5
DGS-3400:4#
Used to view the SSL certificate file status on the Switch.
show ssl certificate
This command is used to view the SSL certificate file information
currently implemented on the Switch.
None.
None.
Used to download a certificate file for the SSL function on the Switch.
download SSL certificate <ipaddr> certfilename <path_filename 64>
keyfilename <path_filename 64>
This command is used to download a certificate file for the SSL function on
the Switch from a TFTP server. The certificate file is a data record used for
authenticating devices on the network. It contains information on the owner,
keys for authentication and digital signatures. Both the server and the client
must have consistent certificate files for optimal use of the SSL function.
The Switch only supports certificate files with .der file extensions.
<ipaddr> - Enter the IP address of the TFTP server.
certfilename <path_filename 64> - Enter the path and the filename of the
certificate file you wish to download.
keyfilename <path_filename 64> - Enter the path and the filename of the
key exchange file you wish to download.
Only administrator-level users can issue this command.
Disabled
0x0004 Enabled
0x000A Enabled
0x0013 Enabled
0x0003 Enabled
223