D-Link xStack DGS-3426 Cli Manual page 29

show port_security
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the port security configuration:
DGS-3400:4#show port_security ports 1-5
Command: show port_security ports 1-5
Port Admin State
----
1
2
3
4
5
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to display the current port security configuration.
show port_security {ports <portlist>}
This command is used to display port security information of the
Switch's ports. The information displayed includes port security,
admin state, maximum number of learning address and lock mode.
<portlist> − Specifies a port or range of ports to be viewed.
None.
Max. Learning Addr. Lock Address Mode
----------- -------------------
Disabled 1
Disabled 1
Disabled 1
Disabled 1
Disabled 1
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
-----------------
DeleteOnReset
DeleteOnReset
DeleteOnReset
DeleteOnReset
DeleteOnReset
26