D-Link xStack DGS-3426 Cli Manual page 211

DGS-3400:4#delete server_group group_1
Command: delete server_group group_1
Success.
DGS-3400:4#
show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view authentication server groups currently set on the Switch.
config authen parameter response_timeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to view authentication server groups on the Switch.
show authen server_group <string 15>
This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
DGS-3400:4#show authen server_group
Command: show authen server_group
Group Name IP Address
--------------- ---------------
Darren 10.53.13.2
tacacs 10.53.13.94
tacacs+ (This group has no entry)
------------ (This group has no entry)
Total Entries : 4
DGS-3400:4#
Used to configure the amount of time the Switch will wait for a user to enter
authentication before timing out.
config authen parameter response_timeout <int 0-255>
This command will set the time the Switch will wait for a response of
authentication from the user.
response_timeout <int 0-255> - Set the time, in seconds, the Switch will wait
for a response of authentication from the user attempting to log in from the
command line interface or telnet interface. "0" (integer zero) means there
won't be a time-out. The default value is 30 seconds.
Only administrator-level users can issue this command.
Protocol
--------
TACACS
TACACS
208