D-Link xStack DGS-3426 Cli Manual page 187

delete iproute default
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the default IP route:
show iproute
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display the contents of the IP routing table:
DGS-3400:4#show iproute
Command: show iproute
Routing Table
IP Address/Netmask Gateway
------------------
10.0.0.0/8
Total Entries : 1
DGS-3400:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#delete iproute 10.48.74.121/8 10.1.1.254
Command: delete iproute 10.48.74.121/8 10.1.1.254
Success.
DGS-3400:4#
Used to delete a default IP route entry from the Switch's IP routing
table.
delete iproute default
This command will delete an existing default entry from the Switch's
IP routing table.
None.
Only administrator-level users can issue this command.
DGS-3400:4#delete iproute default
Command: delete iproute default
Success.
DGS-3400:4#
Used to display the Switch's current IP routing table.
show iproute {<network_address>}
This command will display the Switch's current IP routing table.
<network_address> − IP address and netmask of the IP interface that
is the destination of the route. The address and mask information can
be specified using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
None.
-------------- ------------
0.0.0.0
Interface Hops Protocol
------- --------
System 1 Local
184