D-Link xStack DGS-3426 Cli Manual page 46

disable snmp authenticate traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the SNMP authentication trap support:
config snmp system_contact
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch contact to "
config snmp system_location
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to disable SNMP authentication trap support.
disable snmp authenticate traps
This command is used to disable SNMP authentication support on
the Switch.
None.
Only administrator-level users can issue this command.
DGS-3400:4#disable snmp authenticate traps
Command: disable snmp authenticate traps
Success.
DGS-3400:4#
Used to enter the name of a contact person who is responsible for
the Switch.
config snmp system_contact <sw_contact>
The config snmp system_contact command is used to enter the
name and/or other information to identify a contact person who is
responsible for the Switch. A maximum of 255 character can be
used.
<sw_contact> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no contact.
Only administrator-level users can issue this command.
M I S D e p a r t m e n t I I
DGS-3400:4#config snmp system_contact MIS Department II
Command: config snmp system_contact MIS Department II
Success.
DGS-3400:4#
Used to enter a description of the location of the Switch.
config snmp system_location <sw_location>
The config snmp system_location command is used to enter a
description of the location of the Switch. A maximum of 255
characters can be used.
<sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Only administrator-level users can issue this command.
":
43