show lacp_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display LACP port mode settings:
DGS-3400:4#show lacp_port 1-10
Command: show lacp_port 1-10
Port
------
1
2
3
4
5
6
7
8
9
10
DGS-3400:4#
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to display current LACP port mode settings.
show lacp_port {<portlist>}
This command will display the LACP mode settings as they are
currently configured.
<portlist> - Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
None.
Activity
--------
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
113