Setting The Presence Or Absence Of A Key Card Or Key Counter - Kyocera TASKalfa 4500i Service Manual

Item No.
U204

Setting the presence or absence of a key card or key counter

Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Method
1. Press the start key.
2. Select the item to be set.
Device
Message
Setting: [Device]
1. Select the optional counter to be installed.
Key-Card
Octopus Card
Key-Counter
Off
Initial setting: Off
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [MESSAGE]
1. Select the [Key Device] or [Coin Vender].
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Display
Sets the presence or absence of the key card or key counter
Sets the message when optional equipment is not installed
Display
The key card is installed
The octopus card is installed
The key counter is installed
Not installed
Description
Description
Description
1-3-95
2LL/2LJ/2LH-1