19. Remove two wire holders.
20. Route the key counter wire through the
wire guide and fix it at the wire holders.
21. Release three wire saddles.
22. Remove the wire holder.
23. Route the key counter wire through the
three wire saddles and wire guide and
fix it at the wire holder.
24. Refit the controller box.
25. Refit the left upper cover and the rear
upper cover.
Wire holders
Figure 1-2-30
Wire guide
Wire holder
Figure 1-2-31
1-2-24
2LL/2LJ/2LH-1
key counter wire
Wire guide
Wire saddles
Wire saddle
key counter wire