Kyocera TASKalfa 4500i Service Manual page 453

14. Remove four connectors and two FFC
from the operation PWB.
*: When removing the FFC from the FFC
connector with a lock, remove the FFC
after released by lifting up the lock lever
(see page 1-5-42).
15. Remove four screws and then remove
the operation PWB.
16. Check or replace the operation PWB
and refit all the removed parts.
FFC
FFC connector
with a lock
Connectors
FFC
Screws
Screw
1-5-56
Operation PWB
Connectors
Figure 1-5-92
Operation PWB
Figure 1-5-93
2LL/2LJ/2LH
Screw