Adjusting The Print Start Timing - Kyocera TASKalfa 4500i Service Manual

Item No.
U034

Adjusting the print start timing

Description
Adjusts the leading edge registration or center line.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and
original.
Make the adjustment if there is a regular error between the center lines of the copy image and
original.
Method
1. Press the start key.
2. Select the item to be adjusted.
LSU Out Top
LSU Out Left
Adjustment: LSU Out Top
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
Display
MPT(L)
MPT Half(L) Paper feed from MP tray
Cassette(L)
Cassette
Half(L)
Duplex(L)
Duplex
Half(L)
MPT(S)
MPT
Half(S)
Cassette(S) Paper feed from cassette
Cassette
Half(S)
Duplex(S)
Duplex
Half(S)
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
Display
Leading edge registration adjustment
Center line adjustment
Description
Paper feed from MP tray
Paper feed from cassette
Paper feed from cassette
Duplex mode (second)
Duplex mode (second)
Paper feed from MP tray
Paper feed from MP tray
Paper feed from cassette
Duplex mode (second)
Duplex mode (second)
Description
Description
Setting
range
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
1-3-33
2LL/2LJ/2LH
Initial Change in
setting value per step
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm