Kyocera TASKalfa 4500i Service Manual page 481

[Date/Timer] - Timer settings (Sleep timer)
[Edit Destination] - One-touch presetting
[User/Job accounting] - Defaults for user authentication and job accounting only.
[FAX] - FAX transmittion settings (tel. no. of itself)
[System] - Network settings (IP address)
[Adjustment/Maintenance] - Silent Mode setting
4. Run the maintenance mode for image adjustments which follows.
1. Performs maintenance mode U464 (Calibration) (see page P.1-3-154).
2. Performs maintenance mode U410 (Adjusting the halftone automatically) (see page P.1-3-154).
When connecting the hard disk cables (YC1, YC2) to the PWB, match "BLACK" and "BLUE" marked on the
PWB with the connector colors.
When connecting the USB cables (YC17, YC21) to the PWB, match "BK" and "WH" marked on the PWB with
the connector colors.
Resettings are not required as the data are stored in harddisk.
YC1
BLACK
YC2
BLUE
YC17 YC21
Figure 1-6-5
Figure 1-6-6
1-6-4
2LL/2LJ/2LH-2
Main PWB
Main PWB