Checking Dp Operation - Kyocera TASKalfa 4500i Service Manual

Item No.
U203

Checking DP operation

Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the speed to be operated.
Normal Speed
High Speed
4. Select the item to be operated.
CCD ADP
CCD RADP
CIS
CCD ADP (Non-P)
CCD RADP (Non-P)
CIS (Non-P)
5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Normal reading (600 dpi)
High-speed reading
Display
With paper, single-sided original of CCD
With paper, double-sided original of CCD
With paper, double-sided original of CIS
Without paper, single-sided original of CCD
(continuous operation)
Without paper, double-sided original of CCD
(continuous operation)
Without paper, double-sided original of CIS
(continuous operation)
Description
Description
Description
1-3-94
2LL/2LJ/2LH-1