Kyocera TASKalfa 4500i Service Manual page 69

23. Remove three wire holders.
24. Route the MK-2 signal cable through
the wire guide and fix it at three wire
holders.
*: Dress the MK-2 signal wire away from the
scanner motor and fix.
25. Refit the controller box.
26. Refit the left upper cover and the rear
upper cover.
Wire guide
Wire holder
Wire holders
Figure 1-2-58
1-2-45
2LL/2LJ/2LH-1
Scanner
motor
MK-2 signal cable
Wire guide