Scan To Ftp Error Codes - Kyocera TASKalfa 4500i Service Manual

(2) Scan to FTP error codes

Code
FTP server does not exist on the net-
1101
work.
Login to the FTP server has failed.
1102
Destined folder is invalid.
1103
FTP protocol is not enabled.
1105
Initializing TLS has failed.
1131
TLS negotiation has failed.
1132
Access to the FTP server has failed.
2101
Access to the FTP server has failed.
2102
(Connection timeout)
The server cannot establish communi-
2103
cation.
Connection with the FTP server has
2201
failed.
Connection with the FTP server has
2202
failed.
(Timeout)
No response from the server during a
2203
certain period of time.
Contents Check procedures/corrective measures
1. Check the FTP server name.
2. Confirm device's network parameters.
3. Confirm the network parameters the device is con-
nected.
1. Confirm user name and password.
2. Check the FTP server name.
1. Check illegal characters are not contained within
these names.
2. Check the FTP server name.
1. Confirm device's FTP protocols.
1. Confirm device's security parameters.
1. Confirm device's security parameters.
2. Check the FTP server name.
1. Check the FTP server name.
2. Confirm that the LAN cable is properly connected to
the device.
3. Check the FTP port number.
4. Confirm device's network parameters.
5. Confirm the network parameters the device is con-
nected.
6. Check the FTP server name.
1. Check the FTP server name.
2. Check the FTP port number.
3. Confirm device's network parameters.
4. Confirm the network parameters the device is con-
nected.
5. Check the FTP server name.
1. Check the FTP server name.
2. Check the FTP port number.
3. Confirm device's network parameters.
4. Confirm the network parameters the device is con-
nected.
5. Check the FTP server name.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
3. Confirm destined folder.
4. Check the FTP server name.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
1-4-83
2LL/2LJ/2LH-1