Kyocera TASKalfa 4500i Service Manual page 323

Hide thumbs Also See for TASKalfa 4500i:
Table of Contents

Advertisement

Code
DF staple operation error
7000
7001
CF paper entry sensor non
7100
arrival jam
CF paper entry sensor stay
7110
jam
CF eject sensor non arrival
7200
jam
CF eject sensor stay jam
7210
CF eject sensor non arrival
7300
jam
CF eject sensor stay jam
7310
CF side registration sensor 2
7400
non arrival jam
CF side registration sensor 1
7500
non arrival jam
CF staple operation error
7600
CF paper conveying sensor
7700
non arrival jam
CF paper conveying sensor
7710
stay jam
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
Contents
DF staple sensor (DFSTS) is not turned on within
specified time after driving the DF staple motor
(DFSTM) (4000-sheet finisher).
DF staple sensor (DFSTS) is not turned on within
specified time after driving the DF staple motor
(DFSTM) (1000-sheet finisher).
CF paper entry sensor (CFPES) is not turned on
even if a specified time has elapsed after the
machine eject signal was received.
CF paper entry sensor (CFPES) is not turned off
within specified time of its turning on.
CF eject sensor (CFES) is not turned on within
specified time since centerfold operation starts.
During centerfold operation, CF eject sensor
(CFES) is not turned off within specified time of its
turning on.
CF eject sensor (CFES) is not turned on within
specified time since three fold operation starts.
During three fold operation, CF eject sensor
(CFES) is not turned off within specified time of its
turning on.
CF side registration sensor 2 (CFSRS2) is not
turned on within specified time after driving the
CF side registration motor 2 (CFSRM2).
CF side registration sensor 1 (CFSRS1) is not
turned on within specified time after driving the
CF side registration motor 1 (CFSRM1).
CF staple sensor (CFSTS) is not turned on within
specified time after driving the CF staple motor
(CFSTM).
CF paper conveying sensor (CFPCS) is not
turned on even if a specified time has elapsed
after the machine eject signal was received.
CF paper conveying sensor (CFPCS) is not
turned off within specified time of its turning on.
Conditions
1-4-19
2LL/2LJ/2LH
Jam
location*
K
K
K
K
K
K
K
K
K
K
K
K
K

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 3500iTaskalfa 5500i

Table of Contents