Kyocera TASKalfa 4500i Service Manual page 119

12. Fit the tray cover to the tray stay using
four M4 x 8 screws.
13. Remove two nuts and two pins from the
handset mount.
14. Replace the two nuts and two pins
which were removed at mark A on the
tray mount.
M4 x 8 screws
Figure 1-2-123
Pins
A
Tray mount
Figure 1-2-124
1-2-95
2LL/2LJ/2LH-1
M4 x 8 screws
Tray cover
Handset mount
Nuts
Pins
Nuts